Smart Termal
Insulation
PRODUCTS IN THIS SOLUTION
DAUMANT MANTELFIX
DAUMANT EPS-XPS
PROCESS STEPS
Solution Products
Would it be a lot if you ever asked for a product which will replace both the products of thermal insulation board adhesive and thermal insulation plaster?
Daumer DAUMANT XPS PLAIN Plates; processing of polystyrene raw materials by extrusion process is produced as edge shaped lamps, surface shaped and shielded-armored.
What if this product also contributes to thermal insulation performance?
Step-1
First, mix the mortar in the Daumant Mantelfix package with 5.5-7 liters of water at low speed. Let the mixture rest for a few minutes and then repeat the mixing process.
Step-2
Your application surface must be clean and free of adhesives. Apply mantelfix to this clean surface and insulation material (XPS / EPS) and stick together.
Step-3
After fixing XPS / EPS, re-apply mantelfix to the surface and fix your net.
Step-4
Use Mantelfix again on the last floor.
Step-5
Two days after application your surface will dry. Then it will be ready for painting etc.
Step-6
Thus, you can complete the insulation mortar and adhesive application with a single product.