Through Daumer Academy, we eliminate critical engineering and application errors on site, guiding masters and engineers alike.
A formula leaves our laboratory as a known quantity: measured, tested, certain of itself. The site it arrives at is none of these things. Weather turns, substrates vary, schedules press. Performance is what remains when the certainty of the laboratory meets the reality of the site.
This is the work Daumer has chosen. Our chemists write formulas with the site in mind; our engineers stand on the site with the formula in mind. The distance between the laboratory bench and the scaffold is where performance is decided. It is where we have built our company.
This is what we call the chemistry of performance.
• Raw Materials and Chemicals • Chemistry of performance
• Raw Materials and Chemicals • Chemistry of performance
Daumer products carry CE marking across the range. Our product groups hold TS EN certificates, and our ETICS systems are assessed under European technical approvals. Each document is published on this site: you can view it, download it and verify it before you specify a product.
DAUMER
Certificates
CONSTRUCTION
CHEMICALS
CHEMICALS
A construction chemical is never used alone. An adhesive works with its grout, a render with its insulation board, and a primer decides how the coating above it performs. Daumer develops its twelve product families with this in mind: each formula is written, tested and documented to work with the products applied before and after it.
A construction chemical is never used alone. An adhesive works with its grout, a render with its insulation board, and a primer decides how the coating above it performs. Daumer develops its twelve product families with this in mind: each formula is written, tested and documented to work with the products applied before and after it.
The range covers the building from foundation to roof: tile adhesives and grouts, thermal insulation, repair and anchoring mortars, flooring, waterproofing, epoxy and polyurethane systems, concrete additives, and fire-protective coatings. Each category below opens onto its products, systems and technical documents.
Products that were never tested against each other fail together on site: a primer that seals a surface the coating needed to grip, a screed that moves under an adhesive that does not. A Daumer system is a build-up in which every layer is tested with the layer above and below it. Choose the area you are working on and see the full assembly, product by product.
Fifteen systems, from below-grade waterproofing to fire protection. Discover Your Project Specific Systems Solutions.
1.1. Below-Grade Waterproofing Systems
1.2. Concrete Repair and Restoration Systems
1.3. Anchoring and Structural Grouting Systems
2.1. Masonry and Plaster Systems
2.2. Thermal Insulation (ETICS) Systems
2.3. Facade Finishing and Protection Systems
3.1. Roof Waterproofing Systems
3.2. Terrace and Balcony Systems
3.3. Wet Area Systems
3.4. Pool and Water Tank Systems
4.1. Tiling Systems
4.2. Industrial and Hygienic Flooring Systems
4.3. Static Control Flooring Systems
4.4. Car Park and Traffic Deck Systems
4.5. Passive Fire Protection Systems
INDUSTRIAL
CHEMICALS
CHEMICALS
Daumer’s dispersion portfolio covers architectural and industrial coatings, wood finishes, cement-modified systems and liquid-applied waterproofing. Grades range from hard-film binders for interior, exterior and high-PVC paints through to low-Tg binders for elastomeric membranes and two-component cementitious systems.
The portfolio is complemented by cellulose ethers (HPMC, HEC) and redispersible polymer powders for dry-mix mortar production.
Technical service supports grade selection, formulation trials and specification alignment.
• Raw Materials and Chemicals • Chemistry of performance
• Raw Materials and Chemicals • Chemistry of performance
• Raw Materials and Chemicals • Chemistry of performance
• Raw Materials and Chemicals • Chemistry of performance
Daumer formulations are developed in our own laboratory, and every production batch is approved by that same laboratory before it leaves the plant. The chemists who write a formula see how it behaves in production, and they hear from the field teams what it did on site.
Systems are developed the same way. A primer is not tested on its own; it is tested with the coating it will carry and the surface it will meet. When one layer changes, the layers around it are tested again.
ASUDE ŞURA ŞAFİ
- Quality Control Chemist · MSc Chemistry, PhD candidate
"A batch does not leave the plant until its sample matches the specification. When a result falls outside the range, the batch waits while we find the reason. Most of the time the reason is small. It is still a reason."
TONNES · annual production capacity
0
COUNTRIES · where Daumer products are sold
0
PRODUCT FAMILIES · from tile adhesives to fire-protective coatings
0
Four ways to
work with Daumer
1 · Authorised Dealer
2 · Distributor
3 · Approved Applicator
4 · Retail Distributor
Not sure
which one fits?
The Media Room is where we publish: application sequences filmed on working sites, conversations with the dealers who sell Daumer, footage sent in by the teams who apply it, tests from our laboratory, and news from the catalogue. Whatever we post on social goes here as well, and here it stays.
Introduction 2026/2 Daumer Catalog
Ufuk Turhan
Executive Vice President of Daumer
Media room
Click for more
Why Do Epoxy Resin Castings Turn Yellow? Non-Yellowing Deep Pour Guide
Epoxy resin river tables, custom casting models, transparent art piece
Galerie Carrousel, 5 Rue Picot
83000 Toulon, France
info@fr.daumer.com
Didube, K. Stanislavski Street No. 1
Tbilisi, Georgia
info[@]geo.daumer.com
+49 4921 825 8979
Faldernstraße 15
26725 Emden, Germany
info[@]de.daumer.com
+49 4921 825 8979
Klaasje Zevensterstraat [kapı no eksik]
3193 TW Hoogvliet Rotterdam, Netherlands
info[@]nl.daumer.com
Maslak Mh. Ahi Evran Cd. No: 21, Polaris Plaza, Floor 26, Section 87
34398 Sarıyer, Istanbul, Türkiye
info[@]tr.daumer.com
+90 212 706 97 61
Çarşı Mh. Ziyaret Sk. No: 1, Turhan Plaza, Floor 5
Ortahisar, Trabzon, Türkiye
info[@]tr.daumer.com
+90 212 706 97 61
Daumer works from offices in Europe, the Caucasus and Türkiye, and produces in Türkiye. R&D, production and quality control are carried out at our two Turkish sites; the regional offices are there to serve their own markets. Where we do not have an office, we have a partner who does the same work.
TURKIYE | ISTANBUL Maslak Mh. Ahi Evran Cd. No:21 Polaris Plaza Floor 26 Section 87 SARIYER / ISTANBUL / TURKIYE
TURKIYE | TRABZON Carsi Mh. Ziyaret Sk. No:1 Turhan Plaza Floor 5 Ortahisar | TRABZON / TURKIYE
GEORGIA | TBILISI Didube, K. Stanislavski Street #1 TBILISI
FRANCE | TOULON Galerie Carrousel, 5 Rue Picot, 83000 TOULON
NETHERLANDS | ROTTERDAM Klaasje Zevensterstraat 3193 TW Hoogvliet ROTTERDAM
GERMANY | EMDEN Faldernstraße 15 26725 EMDEN / GERMANY
TURKIYE | ISTANBUL Maslak Mh. Ahi Evran Cd. No:21 Polaris Plaza Floor 26 Section 87 SARIYER / ISTANBUL / TURKIYE
TURKIYE | TRABZON Carsi Mh. Ziyaret Sk. No:1 Turhan Plaza Floor 5 Ortahisar | TRABZON / TURKIYE
TURKIYE | KOCAELİ İnönü Mh. Gebze Güzeller OSB Mh. Pir Sultan Abdal Sk. Galvona No: 3/3 İlyasbey V.D. Gebze / KOCAELİ
TURKIYE | BURSA Teknosab, Taşpınar, 20. Cadde No:17, 16700 Karacabey / Bursa
TURKIYE | KAYSERİ Mimarsinan Organize Sanayi Bölgesi 17. Cd. No. 1 38165 Melikgazi / KAYSERİ
GEORGIA | TBILISI Didube, K. Stanislavski Street #1 TBILISI
FRANCE | TOULON Galerie Carrousel, 5 Rue Picot, 83000 TOULON
NETHERLANDS | ROTTERDAM Klaasje Zevensterstraat 3193 TW Hoogvliet ROTTERDAM
GERMANY | EMDEN Faldernstraße 15 26725 EMDEN / GERMANY