PRODUCTS IN THIS SOLUTION
DAUPRO PRIMER CP-22 is a primer for gross concrete floors and walls as well as a means for protecting surfaces such as gypsum-plaster, gypsum-plywood, gas concrete, chipboard, briquette from moisture…
Would it be a lot if you ever asked for a product which will replace both the products of thermal insulation board adhesive and thermal insulation plaster? What if this product also contributes to thermal insulation performance?
Empty one package of CP-22 into the bucket. Add 4-6 liters of water over the mortar in the bucket.
Mix the mixture with a low speed mixer until homogenous.
Ensure that the floor is clean and free of adhesive before application
Apply CP-22 to the application surface with a textured roller. 24 hours after application, the surface is ready for Daumant Mantelfix application.
First, mix the mortar in the Daumant Mantelfix package with 5.5-7 liters of water at low speed. Let the mixture rest for a few minutes and then repeat the mixing process.
Apply the prepared mixture to the surface with a trowel.
Your surface is now ready with Daumer