Waterproof Tile
Adhesion
PRODUCTS IN THIS SOLUTION
DAUFIX DF-100
DAUPRO AQUA A-20
PROCESS STEPS
Solution Products
Is it possible to provide waterproofing and still let concrete to breathe?
DF-100 is an adequate and practical adhesion solution for ceramics and tiles…
Step-1
Ensure that the floor is clean and free of adhesive before application.
Step-2
If there are cracks on the surface you will apply, first fix them.
Step-3
To prepare the mixture, first pour component B into a plastic container. Gently add component A to the top. Mix these two components in a low speed mixer. Attention! No lumps. Apply the mixture to the surface.
Step-4
Wait 5-6 hours to dry the second coat. Ensure that the surface is moist before applying the second coat.
Step-5
If completely dry, moisten slightly.
Step-6
Apply the second coat perpendicular to the first coat. Your surface will be completely water resistant after 14 days
Step-7
Dilute the mortar in the Df-100 package to 5-6 liters of water. Mix with a low speed mixer until no lump remains. Allow the mortar to rest for 5-10 minutes and mix again.
Step-8
Apply the mortar to the surface. Put the material (ceramic, tiles, etc.) you want to apply on it. Attention; The mortar should touch at least 80% of your coating material.
Step-9
Your surface is now ready with Daumer